Maylit Smart RGB Under Cabinet Lights Kit: Ten Bars, One App

The Maylit smart RGB under cabinet lights kit is a budget-friendly way to add app-controlled, voice-controlled color lighting under kitchen cabinets, shelves, or workbenches. It bundles ten 20-inch light bars, works with Alexa and Google Assistant, and syncs to music through a phone app. This review covers what the kit includes, how the smart features work in practice, and who should skip it.

Features and Specifications

Product Type: Smart RGB under cabinet lights kit
Number of Bars: Ten 20-inch light bars (10 pieces)
Control Methods: Alexa, Google Assistant, app remote control
Lighting Modes: RGB color, dimmable, music sync
Timer: Built-in scheduling via app
Intended Use: Under-cabinet, shelf, and accent lighting
Price Tier: Budget

The kit’s headline feature is breadth: ten separate 20-inch bars give enough coverage for a full run of upper cabinets or several separate zones, and the smart controls mean no wall switch is required for daily use. Voice commands through Alexa or Google Assistant handle on/off and color changes, while the app covers dimming, timers, and music sync. RGB lighting means the bars can produce white light for tasks or colored light for ambience, though the quality of the white output is the usual weak point of budget RGB strips.

The music sync mode uses the phone’s microphone to react to sound, which adds a party trick to a room that otherwise serves a practical purpose. The timer function is genuinely useful for a kitchen — set the bars to come on before dinner prep and shut off afterward without touching a switch. Everything runs through a single app, so the experience lives or dies on that app’s reliability.

Build and Installation

The ten bars are the defining spec here. Twenty inches each is a substantial length, and ten of them cover a lot of linear footage — enough for a large kitchen or a mix of kitchen, shelving, and workspace. Buyers should measure their total run before ordering, because a kit this size can overshoot a small galley kitchen and leave bars unused.

Installation on this type of kit typically relies on adhesive backing or mounting clips, with the bars wired back to a central controller and power supply. The practical constraint is cable management: ten bars means ten runs of wire to route and hide, and under-cabinet installs are unforgiving about visible clutter. Planning the layout before sticking anything down is the difference between a clean install and a tangle.

Because the bars are wired to a shared controller rather than being individually wireless, the placement of the controller and power supply matters. It needs to sit somewhere reachable and near an outlet, which can push the install toward one end of the cabinet run. Buyers in rentals or temporary setups should note that adhesive mounting is less reversible than screw-in clips.

Power and Smart Control

Voice control through Alexa and Google Assistant is the feature most buyers will actually use day to day. Asking a smart speaker to turn the cabinet lights on while carrying groceries is a small convenience that adds up, and it works without reaching for a phone. The app remote control fills in the rest: color selection, brightness, timers, and music sync all live there.

The trade-off with app-based control is dependence on the app and on a stable Wi-Fi connection. If the network drops or the app misbehaves, the fallback is manual control at the controller, which is rarely mounted somewhere convenient. Buyers who want a light that simply works with a wall switch should look at a non-smart kit instead — this one is built around the app.

Music sync is a fun extra rather than a core function. It reads ambient sound through the phone, so the phone needs to be nearby with the app open, which limits how often most households will use it. It shines in a game room or for occasional entertaining, less so in a working kitchen.

Dimmable RGB Output

Dimming and full RGB color give the kit range: bright white for chopping and reading recipes, warm or colored light for evening ambience. That flexibility is the reason to choose RGB over a fixed-white under-cabinet light. The timer pairs well with dimming — the bars can fade on at low brightness as a night light and run at full output for cooking.

The honest caveat on budget RGB kits is color quality. Colored output is usually vivid and fun, but the white setting on an RGB strip tends to look cooler and less natural than a dedicated white LED bar. Buyers who mainly want clean task lighting under cabinets may find the white mode adequate but not impressive, and should weigh whether the color features justify the compromise.

Brightness across ten bars is generally sufficient for accent and ambient purposes. For serious task lighting over a long counter, buyers with high expectations should consider whether an RGB kit at this price delivers the intensity they want.

Who It Suits and Who It Does Not

This kit suits renters and DIYers who want smart, colorful under-cabinet lighting without an electrician, and households already using Alexa or Google Assistant. It also fits game rooms, bars, and shelving where color and music sync are part of the appeal. The ten-bar count makes it a strong value for anyone with a long run to cover.

It does not suit buyers who want switch-only operation, anyone with a very small kitchen who would waste most of the bars, or buyers who prioritize natural-looking white task light above color effects. Those shopping for a permanent, hardwired install should also look elsewhere.

Trade-off: The low price buys ten smart bars, but it also means app-dependent control and RGB white output that will not match a dedicated white task light.

Check the current price on Amazon

FAQ

1. Does the Maylit under cabinet lights kit work with Alexa and Google Assistant?
   Yes. The kit is built for voice control through both Alexa and Google Assistant, alongside app remote control.

2. How many light bars come in the kit?
   Ten bars, each 20 inches long.

3. Can the lights change color?
   Yes. The kit is RGB, so it produces a range of colors as well as dimmable white light.

4. Is there a timer function?
   Yes. Timers are set through the app, which allows scheduling without a wall switch.

5. What is music sync and how does it work?
   Music sync makes the lights react to sound, using the phone and app rather than a separate sensor.

6. Are the lights dimmable?
   Yes, brightness is adjustable through the app.

7. Does the kit need a hub or bridge?
   No separate hub is named — control runs through the app and the smart speakers already in the home.

8. Is this kit good for a small kitchen?
   Possibly not. Ten 20-inch bars cover a long run, so a compact kitchen may leave several bars unused.

9. Can the lights be used for task lighting?
   They can, but the white output of an RGB kit is generally less natural than a dedicated white LED bar.

10. Is the kit suitable for renters?
    Yes, provided the mounting method used is reversible and the controller can reach an outlet.

Bottom Line

The Maylit smart RGB under cabinet lights kit delivers a lot of lighting and a lot of smart control for a budget price. Ten 20-inch bars, Alexa and Google Assistant support, app dimming, timers, and music sync cover the wish list for anyone wanting colorful, voice-controlled under-cabinet light. Buyers who want natural white task lighting or switch-only simplicity should look elsewhere, but for smart ambience on a budget, this kit is the one to check.

Check the current price on Amazon