Best Magnetic Mounts for Small Devices: 5 Top Picks

Magnetic mounts for small devices keep a phone, mini tablet, or GPS unit steady on a dashboard or desk without a bulky cradle. The five picks below cover two jobs: complete mount kits with the magnet built in, and metal-plate packs that turn an existing magnetic mount into a secure hold. Budget shoppers, two-vehicle households, and anyone who swaps devices often will find a fit. The overview table below shows each pick at a glance, and the reviews that follow explain who each one suits.

Overview of the Picks

Product	Key Spec	Best Use	Price Tier
Universal Stick On Rectangle 2-Pack	2 mounts, 4 metal plates	Two-car households	Budget
WixGear X4 Metal Plate Pack	4 plates, 2 shapes	Fixing an existing mount	Budget
Universal Flat Stick On 2-Pack	2 slim mounts, Swift-Snap	Low-profile dash setup	Mid-range
Adhesive Thin Metal Plates 4-Piece	4 thin plates, 2 shapes	Thin phone cases	Budget
DSTELIN 8-Pack Metal Plates	8 plates, 4 rectangle + 4 round	Multi-device families	Budget

1. Universal Stick On Rectangle 2-Pack

Type: Complete stick-on magnetic mount kit
Pack Size: 2 mounts, 4 metal plates
Mount Shape: Flat rectangle
Application: Car dashboard
Compatibility: iPhone, Samsung, and similar phones

Universal Stick On Rectangle,Flat Car Phone Magnet Mount for Car Dashboard Cell Phone Car Mount for iPhone Samsung [2 Pack] Magnetic Phone Holder Mount with 4 Metal Plates

This kit pairs two flat rectangular mounts with four metal plates, so two vehicles can be set up from one purchase. The flat profile sticks close to the dashboard surface, which keeps the phone from blocking sightlines. The plates are the standard adhesive-backed type that slide inside a case or attach to its back. It is a sensible starting point for a buyer who wants a complete, no-fuss setup rather than plates alone.

The twin-pack earns its place for households with two cars, or for anyone who wants a spare mount on a desk or in a second room. Buyers should note that the flat rectangle shape offers no tilt or swivel, so the viewing angle is fixed once the mount is placed. Placement on the dashboard is therefore the one decision that matters most.

Trade-off: The fixed flat design leaves no room to adjust the angle after installation, so a poor placement choice is hard to correct.

Check the current price on Amazon

2. WixGear X4 Metal Plate Pack

Type: Adhesive metal plate pack
Pack Size: 4 plates
Shapes: 2 rectangle, 2 round
Color: Black
Compatibility: Magnetic cradle-less mounts

Mount Metal Plate with Adhesive for Magnetic Cradle-Less Mount by WixGear – X4 Pack 2 Rectangle and 2 Round (Compatible with Magnetic mounts) (Black)

WixGear’s four-plate pack is the fix for a magnetic mount that has lost its grip on a device. The mix of rectangle and round plates covers different device backs and case shapes, and the black finish blends in on dark hardware. Adhesive backing means no tools and no drilling. This is the pick for a buyer who already owns a magnetic mount and just needs fresh plates.

The two-shape assortment suits mixed households where one device takes a rectangular plate and a smaller gadget takes a round one. The plates are thin enough to sit inside most cases, though buyers with very snug or heavily textured cases may find the fit tight. It is a consumable-style purchase, so keeping a spare plate on hand is the practical move.

Trade-off: The adhesive is the weak point over time, and a plate that is repositioned repeatedly will lose holding power.

Check the current price on Amazon

3. Universal Flat Stick On 2-Pack

Type: Complete slim stick-on magnetic mount
Pack Size: 2 mounts
Profile: Extra slim
Technology: Fast Swift-Snap
Application: Dashboard
Device Support: Cell phones and mini tablets

Universal Flat Stick On (2 Pack) Dashboard Magnetic Car Mount Holder for Cell Phones and Mini Tablets with Fast Swift-Snap Technology – Extra Slim

This two-pack targets buyers who want the mount to disappear into the dashboard. The extra-slim flat body sits low against the surface, and the Swift-Snap design is built for quick one-handed placement and removal. It is rated for cell phones and mini tablets, which makes it the most versatile complete kit here. The slim build suits modern interiors where a chunky cradle would look out of place.

The mini-tablet support is the standout detail, since most compact mounts top out at phone-sized devices. Buyers should expect the slim body to hold less mass than a larger cradle, so a full-size tablet is outside its range. It suits a clean, minimal dashboard setup where the mount is meant to be barely visible.

Trade-off: The extra-slim body trades holding mass for looks, so heavier mini tablets may feel less planted than on a larger mount.

Check the current price on Amazon

4. Adhesive Thin Metal Plates 4-Piece

Type: Thin adhesive metal plate pack
Pack Size: 4 plates
Shapes: 2 rectangle, 2 round
Color: Black
Compatibility: Magnetic mounts
Application: Phone case

Adhesive Thin Metal Plates(Compatible with Magnetic Mounts),4 Piece Metal Plates for Phone Case(2 Rectangle and 2 Round) S-07N(Black)

These plates are marketed specifically for phone cases, and the thin build is the reason. A slimmer plate sits flatter inside a case, so the phone still fits without bulging or stressing the case edges. The four-piece set splits into two rectangles and two rounds, covering a couple of devices or a device plus a spare. It is the pick for buyers who keep phones in cases and want the mount to stay unobtrusive.

The thin profile is a real advantage for tight-fitting cases, but it also means less ferrous mass to grip. Buyers with thick or rugged cases should test the hold before relying on it in a moving vehicle. For a standard slim case, the trade is a good one.

Trade-off: Thin plates grip less firmly than thicker ones, so a heavy rugged case may not hold securely.

Check the current price on Amazon

5. DSTELIN 8-Pack Metal Plates

Type: Adhesive metal plate pack
Pack Size: 8 plates
Shapes: 4 rectangle, 4 round
Color: Black
Compatibility: Magnetic mounts
Application: Phone car mount cradle

DSTELIN Universal Metal Plate 8 Pack for Magnetic Phone Car Mount Holder Cradle with Adhesive (Compatible with Magnetic Mounts) – 4 Rectangle and 4 Round, Black

Eight plates in one pack makes this the value pick for families, shared vehicles, or anyone with a drawer full of devices. The even split of four rectangles and four rounds means every device in the house can get a plate without buying again. Adhesive backing keeps installation simple, and the black finish is neutral on most hardware. It is the highest-volume option in this roundup.

The bulk pack suits a buyer who wants to plate a phone, a tablet, a GPS unit, and a spare all at once. The catch is that plates are only useful if there are enough mounts to pair them with, so a large plate count can outpace the mount count. Buyers starting from scratch should pair this with a complete mount kit rather than buying plates alone.

Trade-off: Eight plates can outnumber the mounts on hand, so the value only pays off for buyers who already own several magnetic mounts.

Check the current price on Amazon

Before You Buy

• Material: Metal plates need enough ferrous mass to grip; very thin plates suit slim cases but hold less on rugged ones.
• Size: Match the plate shape to the device back — rectangles for phones, rounds for smaller gadgets.
• Compatibility: Confirm the plates work with the existing magnetic mount, since cradle-less mounts are the standard pairing.
• Mount type: A complete kit includes the magnet; a plate pack does not, so check what is already owned.
• Adhesive: Plates are semi-permanent once stuck; repeated repositioning weakens the bond.
• Device weight: Slim mounts and thin plates are best for phones and mini tablets, not full-size tablets.
• Pack count: Buy plates to match the number of mounts and devices in use, not just the lowest unit price.

Frequently Asked Questions

1. Do magnetic mounts work with phone cases?
   Yes, provided a metal plate sits between the case and the phone or on the case’s outer back. Thin plates are the better choice for snug cases.

2. Can a magnetic mount hold a mini tablet?
   Some can — the slim two-pack here is rated for mini tablets — but full-size tablets exceed what compact mounts are built to hold.

3. What is the difference between a mount kit and a plate pack?
   A kit includes the magnet and the adhesive base; a plate pack only supplies the metal plates that a magnetic mount grips.

4. Will the adhesive damage a dashboard or case?
   Adhesive plates are designed for semi-permanent use, and removal can leave residue or lift a finish, so placement should be planned before sticking.

5. How many plates are needed?
   One plate per device, plus a spare if the device moves between vehicles. Multi-device households benefit from the larger packs.

6. Are round or rectangular plates better?
   Rectangular plates spread across a phone’s back for a steadier hold; round plates suit smaller devices and tighter spots.

Bottom Line

The Universal Stick On Rectangle 2-Pack is the top pick for most buyers: two complete mounts plus four plates cover a two-vehicle household in one purchase. Shoppers who already own a magnetic mount should instead reach for the DSTELIN 8-Pack for maximum plate value, or the thin four-piece set for slim cases.