Why there are Amazon links here: Brave Review is paid a commission for qualifying Amazon purchases made through the links below. Your price does not change, and using our links is entirely optional. How this works
Best Smart Heating Control for a House with a Solid Fuel Stove
A solid fuel stove runs hot and slow, so the control that matters most is the one that switches it down before the room overheats. This roundup covers five smart thermostat remotes built for Heat-N-Glo, Heatilator, Majestic, QuadraFire and HHT appliances, plus one complete gas stove for buyers who want the heat source and the control in a single purchase. It suits owners retrofitting an existing fireplace insert, households running a stove as the main evening heat source, and anyone replacing a lost or failed handset. The overview table below puts every pick side by side so a decision can be made in under a minute.
Overview of the Picks
| Product | Key Spec | Best Use | Price Tier |
|---|---|---|---|
| Skytech Smart Stat II/III Fireplace Remote Control | Smart Stat II/III platform | Heat-N-Glo owners wanting a proven wall-and-handset thermostat | Mid |
| Pellethead Smart-STAT-HHT 110V AC Remote Control | 110V AC, IPI or SP systems | HHT-family stoves with either ignition type | Mid |
| Skytech Smart Stat IV Heat-N-Glo Fireplace Remote Control | Smart Stat IV platform | Newer Heat-N-Glo appliances needing the IV handset | Mid |
| 841-0970 Wireless Remote Control Thermostat Smart Batt II & III | Smart Batt II & III, wireless | Battery-backed thermostatic control across the HHT brands | Premium |
| ProCom Ventless Dual Fuel Gas Stove | 25,000 BTU, remote included | Buyers who want a complete heater with control in the box | Premium |
Skytech Smart Stat II/III Fireplace Remote Control for Heat-N-Glo
Type: Fireplace remote control and thermostat
Platform: Smart Stat II/III
Compatibility: Heat-N-Glo appliances
Function: Thermostatic on/off control
Price Tier: Mid
Skytech Smart Stat II/III Fireplace Remote Control for Heat-N-Glo
This is the established Skytech handset for Heat-N-Glo fireplaces, and it does the job most stove owners actually want: it reads room temperature and cycles the burner to hold a set point rather than leaving the appliance running flat out. The Smart Stat II/III platform is a wall-mount base paired with a handheld remote, so the thermostat can sit away from the radiant heat of the firebox and give a truer reading of the room. Build quality is typical of the Skytech line — a purpose-made fireplace controller rather than a repurposed central-heating thermostat, which matters because stove flues and inserts punish generic electronics.
It earns its place as the default pick for older Heat-N-Glo installations, where the II/III generation is the correct match and later handsets will not talk to the receiver. Buyers with a newer appliance should check the generation before ordering.
Trade-off: The II/III platform is generation-specific, so it will not control appliances built for the Smart Stat IV or Smart Batt systems — a mismatch here means a remote that simply does nothing.
Check the current price on Amazon
Pellethead Smart-STAT-HHT 110V AC IPI or SP Fireplace Thermostat Remote Control
Type: Fireplace thermostat remote control
Power: 110V AC
System Support: IPI or SP ignition
Compatibility: HHT, Heat-N-Glo, Heatilator, Majestic, QuadraFire
Equivalent Reference: Smart-STAT-IV, 841-0960
Price Tier: Mid
Pellethead Smart-STAT-HHT 110V AC IPI or SP Fireplace Thermostat Remote Control
The Pellethead unit is the flexible option for the wider HHT family, and the detail that matters is the dual IPI or SP support. Intermittent pilot and standing pilot appliances are wired differently, and a remote that handles both removes the guesswork for buyers who are not certain which ignition system their stove uses. The 110V AC rating points to a mains-powered receiver rather than a battery-only one, which suits installations where a supply is already at the firebox.
It is the pick for Heatilator, Majestic and QuadraFire owners who have struggled to find a handset outside the Heat-N-Glo badge. The trade-off is that flexibility comes with a setup step — the receiver has to be matched to the ignition type, and a wrong setting will leave the appliance unresponsive.
Trade-off: Dual-system support adds an installation decision that a single-platform remote does not require, so buyers who dislike reading wiring instructions should look at a direct-fit handset instead.
Check the current price on Amazon
Skytech Smart Stat IV Heat-N-Glo Fireplace Remote Control
Type: Fireplace remote control and thermostat
Platform: Smart Stat IV
Compatibility: Heat-N-Glo appliances
Function: Thermostatic on/off control
Price Tier: Mid
Skytech Smart Stat IV Heat-N-Glo Fireplace Remote Control
The Smart Stat IV is the newer generation of the same idea, and it is the correct handset for Heat-N-Glo appliances built around the IV platform. Operation stays deliberately simple: a set point, a flame command and a room-temperature reading, with no app pairing to fight and no firmware to update. For a solid fuel or gas-fired stove that runs for hours at a time, that simplicity is a feature — the control keeps working when the Wi-Fi does not.
It is the sensible upgrade for a household that has already replaced the firebox and now wants the control to match. Buyers with an older II/III appliance should not order it, because the generations are not interchangeable.
Trade-off: The IV platform costs the same as the older II/III unit but only serves newer appliances, so anyone with a legacy Heat-N-Glo gains nothing from paying for the newer generation.
Check the current price on Amazon
841-0970 Wireless Remote Control Thermostat Smart Batt II & III
Type: Wireless remote control thermostat
Platform: Smart Batt II & III
Compatibility: HHT, Heat-N-Glo, Heatilator, Majestic, QuadraFire
Part Reference: 841-0970
Price Tier: Premium
841-0970 Wireless Remote Control Thermostat Smart Batt II & III
This is the battery-backed Smart Batt handset, and the platform name is the giveaway: the receiver runs on batteries rather than relying on a mains feed at the firebox. That makes it the practical choice for older installations with no power at the appliance, and for anyone who does not want to pull a supply through a finished wall. The 841-0970 part reference and the broad brand list mean it is a direct replacement for a failed original handset across the HHT group.
It sits at the top of the remote picks on price, and that premium buys the widest compatibility and the simplest wiring. Buyers with a modern IPI appliance and an existing outlet should weigh whether the battery convenience is worth the extra spend.
Trade-off: Battery-powered receivers need periodic battery changes, and a flat receiver battery in the middle of a cold evening leaves the stove on its manual controls until replacements go in.
Check the current price on Amazon
ProCom Ventless Dual Fuel Gas Stove – 25,000 BTU, Remote Control
Type: Ventless dual fuel gas stove
Output: 25,000 BTU
Control: Remote control included
Finish: Black
Fuel: Dual fuel (natural gas or liquid propane)
Price Tier: Premium
ProCom Ventless Dual Fuel Gas Stove – 25,000 BTU, Remote Control
For buyers who are still choosing the appliance, the ProCom combines the heat source and the control in one box. The 25,000 BTU output and ventless design mean no flue or chimney work, and the dual fuel build lets the same stove run on natural gas or propane depending on what the house already has. The included remote handles ignition and flame height, so the smart-control question is answered at purchase rather than solved afterwards with a retrofit handset.
It suits a room that needs a secondary heat source without a construction project, and households that want a stove and a remote from the same manufacturer. The black finish keeps it visually neutral in most living rooms.
Trade-off: Ventless operation releases combustion moisture and requires adherence to the manufacturer’s clearances and room-volume rules, and at this price it is a far bigger commitment than a replacement handset for an existing stove.
Check the current price on Amazon
Before You Buy
- Compatibility: Match the control platform — Smart Stat II/III, Smart Stat IV or Smart Batt — to the appliance, not just the brand badge.
- Ignition type: IPI and standing pilot systems are wired differently; a dual-system remote covers both but must be configured correctly.
- Power source: Mains-powered receivers suit fireboxes with an outlet nearby; battery receivers suit finished walls with no supply.
- Part reference: A part number such as 841-0960 or 841-0970 is the fastest way to confirm a replacement handset is the right one.
- Brand coverage: Heat-N-Glo, Heatilator, Majestic and QuadraFire share the HHT family, but not every handset serves every brand.
- Control style: Thermostatic cycling holds a room temperature; a plain on/off remote only commands flame, which matters for a stove left running for hours.
- Installation: Receiver wiring and wall-mount placement affect the temperature reading, so plan where the thermostat sits relative to the firebox.
Frequently Asked Questions
-
Will a smart thermostat remote work with a solid fuel stove?
These controls are designed for gas and dual fuel fireplaces and stoves with electronic ignition, not for wood or coal burners. A solid fuel stove is regulated by its air vents, so the remote picks here suit the gas-fired side of a mixed heating setup. -
How do I know which Skytech generation my fireplace needs?
The appliance’s model plate and manual name the platform, and the existing handset usually carries the generation on its casing. Matching the generation matters more than matching the brand. -
Is the Pellethead remote a direct replacement for an 841-0960 handset?
The product name lists Smart-STAT-IV and 841-0960 as references, which points to a direct swap for that handset in HHT-family appliances. Confirming the ignition type before installation avoids a no-response receiver. -
Do these remotes need Wi-Fi or an app?
No. They are radio-frequency handsets paired with a receiver at the appliance, so they keep working during an internet outage and need no account or phone. -
What is the advantage of a battery-powered receiver?
It removes the need for a mains feed at the firebox, which suits older installations and finished walls. The cost is periodic battery replacement. -
Should a buyer choose the ProCom stove instead of a retrofit remote?
Only when the appliance itself is being replaced. For an existing Heat-N-Glo or HHT fireplace, a replacement handset is the cheaper and far simpler route.
Bottom Line
For most households with an existing Heat-N-Glo appliance, the Skytech Smart Stat II/III Fireplace Remote Control is the top pick: it is the proven thermostatic handset for that generation, it cycles the burner to hold a room temperature, and it costs no more than the alternatives. Buyers with a newer appliance should step up to the Smart Stat IV, while Heatilator, Majestic and QuadraFire owners are better served by the dual-system Pellethead unit.
